travelfilterThe Travel / Portable Water Revival System

All of PristineHydro’s Water Revival Systems produce 100% acid and contaminate free pristine water that has a high magnesium bicarbonate content, with traces of calcium and sodium bicarbonate, as well as silica and chloride. This results in an ideal, low TDS of around 60 PPM.

Go to Store
BPA-free, non-toxic materials and components
Approximately one year until first filter change
 Makes up to 30 gallons of water per day
Precision Water Saver Filters
 Quick Thread Faucet Adapter (requires no plumbing)
Includes TDS Meter to check water quality and monitor filter-life

Now its possible to never be without your PristineHydro™ water while traveling on your vacations or business trips. The compact design make it easy to throw in the back seat or trunk of a car, or just check it in at the airport. This travel system is easy to attach to almost any faucet and even garden hoses.

We use 100 gallon per day rated high volume reverse osmosis membranes that has a waste to recovery rate of one to one, which means that for every one gallon of water that is made, one gallon goes down the drain. Most reverse osmosis systems have a waste to recovery rate of five to one, which means that for every gallon made five go down the drain.

Each PristineHydro™ Water Revival System comes with a TDS meter. If the TDS is under 100 and water production is fine you do not have to change any filters. When water production decreases and/or the TDS increases, it is time to change filters.

Many people however like to change filters pro-actively in order to maintain high system performance, rather than waiting for degradation. In that case, we suggest changing the 5 Micron, KDF/Hydroxy Apatite/Carbon, every 12 months and the DIs every 24 months, depending on usage and the TDS of the source water. The RO Membrane, Remineralization Cartridge, and the Coconut Carbon should be changed every three years, again, it depends on usage and the TDS of the source water.

All of our PristineHydro™ Revival Systems have a Reverse Osmosis (RO) Flush Valve, which dramatically extends the life of the RO membrane. Once a month (depending on usage, more often if you are making a lot of water) open the Flush Valve for 2-3 minutes while the unit is making water. When you open the flush valve you should hear a flushing sound, this flushes out the RO membrane.

All PristineHydro™ Water Revival Systems require a minimum of 40 lbs of water pressure for proper performance. If your water pressure is low we sell booster pumps – call the office.  



carbon filtrationSTAGE 1

5 Micron  – This high capacity filter removes dust, particulates, and rust sediments measuring over 5 microns from of the water. Made of 100% pure polypropylene fibers.




toxin removalSTAGE 2, 3

KDF55 – Increases life of activated carbon by 4-5 times. Reduces chlorine, heavy metals, and bacteria.

Coconut Based, Acid-Washed, Surface-Enhanced Activated Carbon – Reduces turbidity, chlorine, chloramines, organic contaminates, pesticides, and chemicals.



reverse osmosisSTAGE 4

High Efficiency Reverse Osmosis – Utilizing an ECO friendly 1:1 waste to recovery process, this stage removes remaining undesirable pollutants down to .001 microns in size (by comparison, the size of most bacteria is about .5 microns / virus about .05 microns). However, RO does not remove acids (which are liquids and gasses) i.e. sulfuric and nitric acids (acid rain), hydrofluorosilicic acid (industrial waste fluoride), hypochlorous and hydrochloric acids (chlorine reactions), haloacetic acid (chlorine and bromine reactions). If you do not remove the acids, you will drink them. NOT GOOD!

de-ionizationSTAGE 5, 6

Dual Deionization – Two Special Proprietary Laboratory Grade Cation and Anion Resin Filters remove the remaining trace contaminants (i.e. personal care products, pharmaceuticals, radiation, total dissolved solids, etc.) as well as all the invasive bad acids that pass-through STAGE 4.



re-mineralizationSTAGE 7

Remineralization – In this stage the number of beneficial ions is increased in the water. This results in a high pH and a low controlled TDS comprised of magnesium bicarbonate, with traces of calcium and sodium bicarbonate, as well as silica and chloride.


carbon filtrationSTAGE 8

Coconut Carbon – Enhances flavor and removes odors while polishing the water to perfection. This carbon filter is made from coconut shell that has undergone a steam activation process to create its activated carbon form with micro-pores. During activation, it creates millions of pores at the surface of the carbon, thus increasing the total surface area.



vortexingSTAGE 9, 10

Restructuring + Recharging – In this final stage the water is run over lodestones and quartz crystals as it would in a natural stream. This naturally restructures, recharges, and reprograms what was once damaged water into the purest water on planet Earth since The Industrial Revolution.

SPRING WATER: it rains chemicals and acid rain (the pollution cycle). When rainwater falls from the clouds as rain, it falls through air filled with bacteria, dust, smoke, smog, chemicals, minerals, gases, radioactive fallout, etc.

WATER IONIZERS: remove acids from tap water; you drink acid free tap water. The water is loaded with the same contaminates found in the source water i.e. fluoride, heavy metals, chemicals, pharmaceuticals, disinfection by-products, etc. Check the TDS (total dissolved solids) of the source water TDS Meter, then check the TDS of the product water: both have the same TDS.

Don’t get me wrong, the Water Ionizer was a great step in our understanding of water. It taught us that the acids in water were causing major health complications. However, under close examination (a Laboratory Analysis) we found it was merely acid free Tap Water!

PristineHydro™ does NOT electrocute your water. The concept of electrocuting dead polluted water with a water ionizer to revive it is pseudo-science. Water ionizers rupture already lifeless water releasing hydroxyl ions. Chemically speaking it is not even natural water anymore, it is more or less a man-made liquid concoction. That is the reason the pH of ionized water only lasts for 24 to 48 hours; any other water on earth with that much TDS, would keep its pH reading for months if not years. PristineHydro™ produces pristine water the way nature designed it; PristineHydro™ maintains its pH for up to one year.

BOTTLED WATER: quality is unregulated. Over 24,500 chemicals found in plastic bottled water. Plastic wastes are harmful to the environment.

REVERSE OSMOSIS: removes most contaminates, except acids (which are liquids and gasses) i.e. sulfuric and nitric acids (acid rain), hydrofluorosilicic acid (industrial waste fluoride), hypochlorous and hydrochloric acids (chlorine reactions), haloacetic acid (chlorine and bromine reactions); in turn RO produces aggressive acidic water that is void of bicarbonate salts.

DISTILLED WATER: rising steam is supposed to leave all impurities behind in the distilling process, but in fact gases, some chemicals, and some organic compounds are taken along with the steam. Distilling does not removes acids or chlorine/chloramine, which are liquids and gasses i.e. sulfuric and nitric acids (acid rain), hydrofluorosilicic acid (industrial waste fluoride), hypochlorous and hydrochloric acids (chlorine reactions), haloacetic acid (chlorine and bromine reactions); the chlorine/chloramine, acids, and other chemicals evaporate and end up in the product water; in turn produces highly aggressive acidic water void of bicarbonate salts. In fact, in the 1950s distilled water was sold in drug stores with the label “Not for Drinking!” It was predominantly used to fill car batteries and steam irons.

Natural water has mineral content. By removing minerals, water becomes acidic and aggressive, meaning it will seek to replace the ions (minerals) removed. Water treated by either distillation or RO will become even more acidic upon contact with air airborne carbon dioxide that reacts with the water and makes carbonic acid, which takes the place of the ions (minerals) that were removed.

The use of distilled and/or RO water will cause electrolyte imbalance in your body because it is stripped of all minerals. In turn, your body will leach electrolytes and minerals from tissue and bone in order to neutralize the acids in the water you are drinking.

Clean, healthy water should not be pure. In fact, the waters with the most epicurean interest are acid free and contain bicarbonate salts and trace elements.

CARBON BLOCK FILTERS: insufficient as stand-alone filter; produces acidic water that is loaded with contaminants.

TAP WATER: not recommended for drinking; acidic and chemically treated lifeless water that contains many contaminants including sulfuric, nitric, hydrofluorosilicic, hypochlorous, and hydrochloric acids, fluoride, heavy metals, chlorine/chloramine, disinfectant by-products, pharmaceuticals, etc.

PristineHydro™ (PHD) Certificate of Analysis / Lab Results PHD Water Revival System


PHD Lab Results / Endocrine Disrupting Compounds & Pharmaceuticals & Personal Care Products


Weck Laboratories / Certificate of Analysis / Lab Results Water Ionizer / TDS = 400 PPM



PristineHydro™ Water Revival Filters are not designed to fit or be used with other water filtration systems and may cause significant damage to other manufacturers’ products. PristineHydro™ is not responsible for any such use of its filter and returns will only be accepted for manufacturer defects.

In store payment options available for our local customers. Please setup an appointment by emailing:

Shop and View all of our Water Revival Systems